Cleaning Generator Power For Electronics

Energy is crucial in any modern household, and you should have a backup plan in case of a power loss. Though there are numerous backup plans available, none are compared to a power generator.

How To Clean Generator Power?

While a generator will give you consistent electricity, keep in mind that generator power is not the same as regular, uninterrupted power from the grid. In any event, the usual unit produces output variations, resulting in “dirty” power.

The indicators of dirty power are easy to spot, and they’re more noticeable in more sensitive electronics like laptops, LCD panels, PCs, and mobile phones.

What Is Dirty Power?

Dirty electricity is a type of electrical pollution that is becoming increasingly common in many homes. It’s a problem with the generator’s ability to deliver high-quality electricity to your gadgets.

All electrical systems, including generators, rely on a constant source of power at a specific voltage and frequency, thus electrical equipment is designed to work with that power.

When the power given to a system does not match what is expected, however, disturbances can occur.

In the majority of cases, anomalies in generators are produced by a variety of factors, including:

  • The power factor is low.
  • Variations in voltage
  • Variations in frequency
  • Surges.

All of the above difficulties have one thing in common: they’re all disruptive, expensive, and can cause your equipment to break down or malfunction in various ways.

The good news is that you can clean up or normalize your generator power in a variety of methods. And we’re here to show you how to go about doing it.

Is It Possible For A Generator To Harm Electronics?

In order to generate direct AC power of 120 volts and 60Hz, conventional generators burn fuel and spin at 3,600 rpm. These generators, like most conventional motors, do not maintain a constant 3600 rpm; there are occasional fluctuations.

Harmonic distortion is the term for these variations, which cause minor power decreases and surges on a moment-by-moment basis. Electronic gadgets can be severely harmed by these surges.

Inverter generators, on the other hand, have a considerably more complicated system that converts AC to DC power and then back to AC power for output. Inverter generators create a constant, stable voltage of power that is free of harmonic distortion.

Inverter generators generate electricity without spikes that might harm devices. They also have the advantage of being more efficient because they can only create as much electricity as is required at any given time.

What Is The Best Way To Clean Generator Power For Electronics?

Dirty power is often created by a malfunctioning generator component that can be easily changed. To normalize (clean) the generator power and protect your equipment, follow these steps:

1. Using an uninterruptible power supply (UPS)

This is a basic device that even beginners can use. A UPS, as you can see, has some electronics and a large single battery (could be more than one battery).

However, you may find it insufficient for managing voltage and initiating power stability in your electronics. Because the generator isn’t supported by every UPS.

As a result, you’ll need to choose a UPS that can handle any generator you utilized. The operation of various sorts of UPS is extremely simple in this case. They keep providing flawless sine wave electricity by internally transforming the incoming current.

2. Inverters

Although inverter generators have an inverter built-in, you can still purchase an inverter and “convert” your conventional generator to an inverter.

Your generator will not be able to convert AC electricity to DC and back to AC if you use an inverter. These processors will not only give you clean electricity, but they will also control the generator speed, allowing your unit to run at lower speeds when the load is lower.

The latter has the advantage of making your standard generator quieter, improving fuel economy, and lowering fuel consumption.

3. Automated Voltage Regulator

You could, on the other hand, employ a smart UPS. Some of these have an automated voltage regulator (AVR), which allows you to supply this clean energy to your precious household electronics.

You might utilize a second solid-state voltage regulator to complete the task for you. These regulators were invented a long time ago, but they are still employed in a variety of equipment, including automobiles because they provide a stable and clean voltage.

In general, they detect the generator’s output voltage and adjust the field current accordingly to maintain a steady output despite load variations.

However, before you buy a voltage regulator, be sure it has enough capacity to support your generator.


If you don’t want to spend the money on a new generator and the other options described above don’t work, you might want to hire an expert to examine the generator in question.

Related Questions

Is it safe to use generator electricity for electronics?

The good news is that generators are safe for electronics since they have mechanisms that prevent power from saturating circuits. This makes the power coming out of the socket just as safe as what normally comes out.

Will a generator that isn’t an inverter do damage to electronics?

In general, inverter-based generators do not cause damage to electronics, although non-inverter generators may. Harmonic distortion causes moment-to-moment minor power surges and drops, which can be dangerous to electronic devices if you don’t have a surge protector.


It is not as difficult as it may appear to clean your dirty generator electricity. As you can see, there are several options for cleaning your generator power, and you must choose one that best meets your demands.

You will no longer have to worry about frying your expensive equipment due to a faulty electrical system.

Leave a Comment