Charging of a Generac Generator Battery

Generac generators are efficiently designed portable generators with long battery time. The batteries of these generators are of high quality and durable.

How to charge generac generator battery?

To charge the battery, you must plug the wires into an outlet. When the power goes out, the generator is connected to the house’s wiring, allowing the battery to be charged.

What is the importance of battery specification for a generator?

Many charging issues arise as a result of disregarding battery specifications. Maximum charging voltage and maximum charging current are the most important for a certain battery.

Because different types of batteries have distinct chemical reactions when charged, they must be charged in a specific manner. The charge profile will have a maximum charge voltage and will properly deliver the battery current to ensure that it charges to 100%.

If you choose the wrong charger or pair it with the improper profile, you can expect a significant reduction in the battery’s health and life, as well as the possibility of the battery failing.

What should you do to keep the battery of the generator in good condition?

Neglecting battery standards causes plenty of charging difficulties. For a given battery, the maximum charging voltage and current are the most essential.

Different types of batteries react chemically differently when charged, thus they must be charged in a certain way. The charge profile will have a maximum charge voltage and will properly supply the battery current to guarantee that it charges 100%.

You should expect a considerable drop in the battery’s health and life, as well as the potential of the battery failing if you use the wrong charger or match it with the wrong profile.

What are the steps for the maintenance of the generator battery?

Maintenance of any electrical appliance is essential for its functioning. Mostly, the faults in generators are due to poor maintenance.

Following are some basic steps to maintain a generator battery:

  • Cleaning and tightening the battery terminals

The operation of the battery causes gaps to form between the terminals/poles, resulting in oxidation between them. Therefore, it is advisable to keep them very tight and clean and to put Vaseline, or a protection product against oxidation.

  • Check the level of water in the battery.

The liquid level of the battery tends to decrease with use, whether the engine is running or stopped (with an auxiliary battery charger to maintain the charge). Because a low level of liquid damages the battery, you should keep an eye on it and add distilled water as needed.

  • Examine the voltage.

You should conduct a frequent test by connecting the positive and negative poles to a multimeter set to DC voltage.

 If the result is less than 12V, the battery will be unable to supply the generator’s DC electrical component and, subsequently, will not be able to provide power to the starter to start it up. In this instance, replacing the battery is the best option.

  • Regularly start the generator

The battery will be harmed if the generator is turned off for an extended period of time. You should start the generator on a regular basis.

How Do You Replace a Generac Generator’s Battery?

Disconnect the battery charger before replacing a battery in a Generac generator. After that, take off the generator’s outer panel, detach the old battery, and replace it with a new one.

It’s critical to unplug the battery charger to avoid shorting the charger by dropping the positive connector. Simply push the ends of the parts together, press the connecting button, then draw the pieces apart. Once the battery has been replaced, remember to reconnect it.

After removing the battery, wash your hands well since acid might contaminate the skin. Make sure the new battery is in good working order and that the terminals are clean.

If the generator terminals are unclean, use a cleaning tool or a pocketknife to scrape them clean. Special tools for cleaning electrical equipment are available at most hardware stores.

It’s important to remember to connect the positive terminal first. The red cord on the positive terminal is red, whereas the black chord on the negative terminal is black.

When tightening the positive terminal, take care not to touch the wrench to any metal on the battery, as this could cause an electrical spark, which could harm the tools and equipment.

Related questions

How often should I charge the battery in my generator?

Keep your battery completely charged at all times or recharge it every time you use around a quarter of its capacity to get the most out of it.

What is the price of a Generac battery?

Pricing starts at $9,999 MSRP+ for the inverter, battery storage, and three battery modules. Remember that you may be eligible for state and federal rebates, tax credits, and other incentives to offset the cost of the unit.

Is it possible for a generator to charge its own battery?

It isn’t unusual for a portable generator to fail to charge the battery. A trickle charger hooked into mains power is required for the majority of them. When the power is out, the battery is always completely charged. The battery on that model does not charge while it is running.


Now, you are familiar that charging the battery of the generator is easy. It depends on whether your generator has the option of charging or it should be connected to a house power supply.

Leave a Comment